Left-handed 1967 Vintage Replacement pickup set fit Fender Stratocaster



Made with authentic details and scatter wound winding.

Independent customer reviews on ebay – feedback.ebay.com



Made with authentic details and scatter wound winding

I studied about two dozen original pickups produced from 1953 to 1970.

I made several dozen tests of the chemical composition of the wire and magnets.

I took measurements of the gauge and thickness of the wire.

I took measurements of the shape and thickness of the vulcanized fiber.

thanks to me, I was able to order wire and magnets based on the data received.

Today I can offer you pickups made with maximum precision. These pickups are made with historically correct components:

– The exact match of the wire, a slightly thicker wire that is now not found in the American industry, since 1970. A thin layer of varnish, heavily baked after application, after which it becomes a dark shade. But not as black as on modern Plain Enamel. It was up to and including 1969 that Plain Enamel wire had a different shade of color, see photos of the original pickups. A lighter brown or crimson shade. I was able to make a batch of wire according to the CBS-era wire specification. At this time, there was a wire of 3 calibers in the original pickups. This is the standard AWG42, as well as intermediate calibers between AWG42 and AWG43 or AWG41 and AWG42. The resistance of these pickups was usually 5.5-5.8 K and lower for AWG41 1/2. AND 6.2-6.4 K and higher for AWG42 1/2. Now what is usually erroneously referred to as Low Wind and Hot Wound.

– Exact match of the magnet. Thickness, height, chemical composition of the magnet. The former composition differs from the modern composition of Alnico 5. This is why some manufacturers use alnoco2 for imitation, since it is closer in magnetic field strength to the original composition.

– Fiber thickness, often in the lower fiber it is customary to use a thickness of about 2.2-2.4 mm the Original pickups of the 60s had a fiber thickness of 2.6-2.7 mm. I was able to find a 2.6 mm fiber for the lower part. The protrusion of the magnet below the wire affects the sound, this is also important.

– The resistance of the pickups was determined by the thickness of the wire, not the number of turns. It is very convenient to call them low wind, if the industry does not produce this caliber of wire. But this is a different sound. The resistance of my pickups matches the original without loss in sound.

– Winding pattern. Historically, the CBS era is machine winding. I used the best of this pattern and added my own color, trying to emphasize the sound of guitarists of that era in the winding.

– The most important thing is the sound. This set has respect for the clanging attack of the late Jimi Hendrix and the jar-popping sound of Richie Blackmore.

Pickups potted in a mixture of paraffin and beeswax.

Resistance: Neck – 5.5 K, Middle – 5.6 K, Bridge – 5.8 K, DCR +/- 5%

Complete set

3x Pickup

3x Pickup Covers

6x Height Screw for Strat

6x Pickup Spring

Additional information

Weight 0.22 kg
Dimensions 12 × 7 × 3 cm
Relic magnets

Relic, Without Relic


Mid pickup RW/RP (non hum in 2 and 4 positions), Without RW/RP (All three pickups are in the same polarity and wound)


There are no reviews yet.

Be the first to review “Left-handed 1967 Vintage Replacement pickup set fit Fender Stratocaster”

Your email address will not be published. Required fields are marked *